A

• ACS – Automation Control System used for managing burner sequences and operations.

B

• B155 / B175 / B175A / B222 / B222F / B230K – Common burner component model numbers.
• Belts – Drive or fan belts used within burner units or fans.
• Biogas Burners – Burners designed to operate using biogas, often with stainless steel heads.
• Burner – A device used in heating systems to mix fuel with air and ignite it.
• Booster (Gas Booster) – A device that increases gas pressure for combustion systems.
• Boilers (Steam Generators) – Coil-based steam producers offering rapid startup.

C

• C11 / C15 / C15 Fault Code – Diagnostic codes or burner component identifiers.
• Combustion Control System – Automated systems for air–fuel regulation.
• Coupler – Mechanical connector between motor and fan or pump.
• CO‑Trim – Combustion fine-tuning feature for low CO emissions.

D

• Dual Fuel Burner – Operates on two types of fuel, such as gas and oil.
• Duobloc Burner – Two-piece burner with separate motor and fan.

E

• Electro Hydraulic Actuator – Converts electrical energy into hydraulic motion.
• Electronic Modulation – Digital control of firing rate, typically with VSD and PID.

F

• False Flame – False detection of flame, often due to a sensor fault.
• Fault Code / Fault Code 36 – Diagnostic codes for burner system issues.
• Flue Gas Recirculation (FGR) – Reuses flue gases to reduce NOₓ emissions.

G

• Gas Valve – Controls the flow of gas to the burner safely.
• Gas Booster – See Booster.

M

• MCERTS – UK certification standard for emissions and monitoring equipment.
• Modulation (Digital Modulation) – Burner output adjustment for efficiency.
• Monobloc Burner – Integrated burner design with axial airflow.

O

• Oxygen Trim (O₂ Trim) – Maintains optimal combustion oxygen levels.

P

• Pressure / Pressure Transmitter – Measures and regulates system pressure.
• Pilot Flame – Small ignition flame for lighting the main burner.

R

• Ratiotronic – Advanced burner management and control system.
• Ratiotronic 6000 / 6061 / 6066 / 2026 / 1021 / 60 / 600 / 202 / 200 – Variants of the Ratiotronic system.

S

• Sequence – Ignition and operation order of burner components.
• Siemens LMV – Burner system with electronic air–fuel ratio and gas valve proving.
• Steam Generator – Coil-based compact system for fast steam production.

T

• TDG / TDG3 / TDG05.100 / TDG4.450 / TDG6 – High-performance dual-fuel burners.
• TD410 – Specific burner or controller model.
• TG / TG02 / TG03 / TG04 / TG05 / TG06 / TG24 / TG35 / TG37 / TG310Y / TG530 / TG650Y – Industrial gas burner models.
• TGO4.65 / TGO04.65MP – Mid to high-capacity gas burners.
• TL 410 / TL 5800 / TL 5800 ME – Large output burners from the TL series.
• Turn Down – Ratio of maximum to minimum burner output.

U

• UKCA – UK Conformity Assessed mark (post-Brexit CE equivalent).